atelier 13 audio








ULTRA TONEARM
Custom-developed and manufactured in the USA, the 10-inch Ultra tonearm uses smooth, high-quality ball bearings for low friction in the vertical and horizontal plane so all you hear is what is in the grooves. Cardas Audio wiring maintains signal purity from the headshell leads all the way through to the high-quality, gold-plated RCA connectors.
ISOLATED AC SYNCHRONOUS MOTOR
Our stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.
CONSTRAINED LAYER DAMPENING
UltraDeck features three aluminum plates carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.
METICULOUS DESIGN AND EVALUATION
Advanced technology, user-friendly features, and unflappable design elements ensure phenomenal playback—ultimately bringing the sound of Mobile Fidelity’s famous studio into your home.



ANTI-VIBRATION FEET BY HRS
Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.
1.3-INCH DELRIN® PLATTER
UltraDeck features a massive 1.3-inch Delrin® platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin® is a next-generation polymer developed by Dupont. In the world of audio, Delrin's® highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.
HARDENED-STEEL INVERTED BEARING
Our hardened-steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphire—found in much more expensive turntables—will provide you many years of high-performance playback.

FEATURES
-
33-1/3 / 45.0 RPM belt drive turntable
-
Custom design and manufactured in the USA
-
10-inch MoFi Ultra Tonearm
-
1.3-inch Delrin® platter
-
Isolated 300 RPM AC synchronous motor
-
Anti-Vibration feet designed by HRS
DOWNLOADS
TURNTABLE SPECIFICATIONS
Motor
300 RPM AC Synchronous
Speeds
33 1/3 RPM, 45.0 RPM
Platter
6.8 lb Delrin®
Wow & Flutter
0.017% – 0.025%
Signal-To-Noise Ratio
74dB
Power Supply Requirements
120V 60Hz, 220-230V 50Hz, 100V 50Hz
Power Consumption
< 5W
Dimensions
19.69" x 6" x 14.25"
Weight
23.1 lb
TONEARM SPECIFICATIONS
Type
10" straight aluminum, gimbaled bearing
Overhang
0.71" (18mm)
Offset Angle
22.8˚ (+/- 2˚ adjustable)
Cartridge Weight Range
5g – 10g


MOFI STUDIODECK
It’s only natural to use the word “Studio” in the name of one of our turntables, as doing so brings together MoFi’s software and hardware sides. And while it’s our entry-level offering, StudioDeck produces high-caliber sound at a value price. Designed in collaboration with some of the world's finest audio designers, StudioDeck features an incredible amount of ingenuity and technology usually reserved for much more expensive products.
MAP PRICE STUDIODECK $ 1,499.00 / Including Tonearm - no cartridge
MAP PRICE STUDIODECK + $ 1,599.00 / Including Tonearm & StudioTracker Cartridge / Ready-to-Play
MAP PRICE STUDIODECK + U $ 1,799.00 / Including Tonearm & UltraTracker Cartridge
MAP PRICE STUDIODECK + M $ 1,999.00 / Including Tonearm & MasterTracker Cartridge
TURNTABLE SPECIFICATIONS
Motor
300 RPM AC Synchronous
Speeds
33 1/3 RPM, 45.0 RPM
Platter
3.88 lb Delrin®
Wow & Flutter
0.017% – 0.025%
Signal-To-Noise Ratio
72dB
Power Supply Requirements
120V 60Hz, 220-230V 50Hz, 100V 50Hz
Power Consumption
< 5W
Dimensions
19.69" x 5.375" x 14.25"
Weight
19.1 lb
MOFI UltraPhono
StudioPhono replicates the wide bandwidth transparency Mobile Fidelity Sound Lab mastering engineers demand.
Tim De Paravicini, the designer responsible for the Mobile Fidelity Gain2™ Ultra Analog cutting system, assisted with the internal circuitry to ensure your analog system at home faithfully reproduces the music buried in the grooves of your LPs.
CLASS-A HEADPHONE AMPLIFIER
UltraPhono includes a powerful Class A headphone amplifier perfect for quiet nights when you want to keep the records spinning in private. And with a 31-step volume control built into the unit, all you need to do is directly plug-in your headphones and turn it up! It's the easiest way to achieve high-fidelity vinyl playback without speakers and electronics.
ADJUSTABLE GAIN AND LOADING
With selectable gain and loading, you will be able to tailor UltraPhono to match nearly any moving-magnet or moving-coil cartridge on the market. A readily accessible bank of toggle switches can be found on the unit’s underside to quickly make adjustments without the need for any tools.
SPECIFICATIONS
Gain
Adjustable from 40dB - 66dB
THD
< .006% (MM) / < .055% (MC)
Load Impedance (MM)
47,000 Ohms
Load Impedance (MC)
75, 100, 500, 1k, 10k, 47k Ohms
Input Capacitance
100pF
MAP PRICE ULTRAPHONO $ 499.00
HEADPHONE AMPLIFIER
Headphone Output
8V RMS Max, 62 Ohms, 1.5 w/ch
Volume Control
31 steps, 2dB per/step, 62dB range
Mute Switch
-90dB
Minimum Impedance
> 10 Ohms
FEATURES
-
Selectable gain for MM or MC 40dB, 46dB, 60dB, 66dB
-
Adjustable loading 75Ω - 47kΩ
-
Class A Headphone Amplifier
-
Switchable Mono mode
-
Subsonic filter
-
External power supply
DOWNLOADS
Mobile Fidelity UltraPhono Manual
ADJUSTABLE GAIN AND LOADING
With selectable gain and loading, you will be able to tailor StudioPhono to match nearly any moving-magnet or moving-coil cartridge on the market. A readily accessible bank of toggle switches can be found on the unit’s underside to quickly make adjustments without the need for any tools.
MONO AND SUBSONIC FILTER MODE
Two selectable toggle buttons on the top of the unit can engage Mono or Subsonic filter mode. If you're a fan of mono recordings, vintage or reissues like the Beatles in Mono box set or the Mobile Fidelity Sound Lab Bob Dylan Series, the Mono mode will come as a revelation. It will improve image stability and generate richer tone.
SPECIFICATIONS
Gain
Adjustable from 40dB - 66dB
THD
< .01% (MM) / < .012% (MC)
Load Impedance (MM)
47,000 Ohms
Load Impedance (MC)
75, 100, 500, 1k, 10k, 47k Ohms
Input Capacitance
100pF
MAP PRICE STUDIOPHONO $ 349.00
FEATURES
-
Selectable gain for MM or MC 40dB, 46dB, 60dB, 66dB
-
Adjustable loading 75Ω - 47kΩ
-
Switchable Mono mode
-
Subsonic filter
-
External power supply
DOWNLOADS
Mobile Fidelity StudioPhono Manual
MOBILE FIDELITY
MOFI Super HeavyWeight
MoFi Electronics proudly announces the addition of the Super HeavyWeight record weight to its product lineup. Best described as a “super noise killer,” it is intended for use with all makes of turntables
— not just MoFi Electronics models
INTRODUCING THE MUST-HAVE ACCESSORY FOR ALL TURNTABLE OWNERS
Super HeavyWeight was conceived with the assistance of MoFi Electronics’ good friend, Mike Latvis, of Harmonic Resolution Systems (HRS). The device uses Latvis’ proprietary polymer material, renowned for its exceptional noise-absorption characteristics. In addition to coupling the record to the platter, Super HeavyWeight significantly reduces noise—specifically, record groove, motor, and bearing noise. Listeners will hear more music due to resultant blacker backgrounds, increased inner detail, improved clarity, enhanced microdynamics, and greater bass impact.
Created by music lovers for music lovers, and born from a desire to get the most music out of vinyl LPs, Super HeavyWeight is a real “ear opener” that offers exceptional value—especially for budget-minded vinylphiles. While no turntable is perfect, adding a Super HeavyWeight guarantees a big leap in sonic performance.
FEATURES
-
Dimensions: 3.0” diameter and 1.355” height
-
Weight: 367.4 grams, the optimum weight with respect to applying no strain or stress to a turntable’s motor, bearing, or suspension
-
Outer shell: Comprised of billet-machined 6061 aluminum for an easy grip
-
Underside: Made from a soft polymer that ensures damage-free operation with LPs
MAP $ 199.00

MOFI ULTRADECK
The word “Ultra” is synonymous with Mobile Fidelity Sound Lab's philosophy. It represents our extreme pursuit of the highest level of reproduction of recorded sound—beyond the status quo—to provide music lovers with the experience of hearing the Original Master Recording in their home. Whether you're enjoying a standard LP or one of our UltraDisc One-Step limited-edition records, UltraDeck will deliver faithful playback of what's in the grooves
MAP PRICE ULTRADECK $ 2,499.00 / Including Tonearm - no Cartridge
MAP PRICE ULTRADECK + $ 2,799.00 / Including Tonearm & UtraTracker Cartridge / Ready-to-Play
MAP PRICE ULTRADECK + M $ 2,999.00 / Including Tonearm & MasterTracker Cartridge / Ready-to-Play
MAP PRICE ULTRADECK + UG $ 3,499.00 / Including Tonearm & UltraGold MC Cartridge / Ready-to-Play
Free Shipping on all Turntables

METICULOUS DESIGN AND EVALUATION
Advanced technology, user-friendly features, and unflappable design elements ensure phenomenal playback—ultimately bringing the sound of Mobile Fidelity’s famous studio into your home.
FEATURES
-
33-1/3 / 45.0 RPM belt drive turntable
-
Custom design and manufactured in the USA
-
10-inch MoFi Ultra Tonearm
-
3/4-inch Delrin® platter
-
Isolated 300 RPM AC synchronous motor
-
Anti-Vibration feet designed by HRS
DOWNLOADS
TONEARM SPECIFICATIONS
Type
10" straight aluminum, gimbaled bearing
Overhang
0.71" (18mm)
Offset Angle
22.8˚ (+/- 2˚ adjustable)
Cartridge Weight Range
5g – 10g




MOFI StudioPhono
StudioPhono replicates the wide bandwidth transparency Mobile Fidelity Sound Lab mastering engineers demand.
Tim De Paravicini, the designer responsible for the Mobile Fidelity Gain2™ Ultra Analog cutting system, assisted with the internal circuitry to ensure your analog system at home faithfully reproduces the music buried in the grooves of your LPs.




STUDIO TONEARM
Custom developed and manufactured in the USA, this 10-inch straight aluminum gimbaled bearing tonearm delivers the ideal balanced of rigidity and low tracking error, so all you hear is what is in the grooves. Tweak to your heart's delight with provisions for adjustable tracking force, VTA, azimuth, and anti-skate.


ISOLATED AC SYNCHRONOUS MOTOR
Our 300 RPM stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.
CONSTRAINED LAYER DAMPENING
StudioDeck features an aluminum plate carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.

HARDENED-STEEL INVERTED BEARING
Our hardened-steel inverted bearing system is designed for smooth, quiet rotational stability. The extremely low tolerance combination of steel, bronze, and sapphire—found in much more expensive turntables—will provide you many years of high-performance playback.

1.3-INCH DELRIN® PLATTER
UltraDeck features a massive 1.3-inch Delrin® platter. The increased mass creates blacker sonic backgrounds and a lower noise floor. Delrin® is a next-generation polymer developed by Dupont. In the world of audio, Delrin's® highly crystalline structure presents a wonderful impedance match to vinyl records, effectively grounding unwanted noise and keeping it away from the stylus.

ANTI-VIBRATION FEET BY HRS
Any vibration of the stylus that is not created by the grooves in the record is a distortion that will mask musical detail. Developed in conjunction with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation for audio equipment, the included MoFi anti-vibration feet isolate your turntable from bad vibrations.



MOFI MOBILE FIDELITY TURNTABLES







