TRI ART AUDIO TURNTABLE

 

MUSICALITY  --  SIMPLICITY -- MOMA DESIGN

Ingeniously Simple Set Up

Magically Musical

Design Worthy of the Museum of Modern Art

 

B-Series TA-2 TURNTABLE



 

MRSP  $ 2,750  / with 9" TA-2 Tonearm --- MRSP  $ 2,885  / with 12" TA-2 Tonearm

MRSP  $ 2,115  / no Tonearm

MRSP  $ 3,245  / with 2 Tonearms including  9" TA-2  & 12" TA-1 Arm

MRSP  $ 3,590  / with 2 Tonearms including  9" TA-2  & 12" TA-2 Arm

MRSP  $    165  / B-Series Record Clamp

We’ve developed the sonic signature of the P-Series Turntable further with our release of the B-Series Turntable, complete with twin motors and dual plinths. The B-Series offers ground-breaking sound definition and imaging. The turntable mounts up to two Tone Arms and supports 9″ and 12″ options to personalize your listening experience. Turn it up with B-Series.
 

Weight: 10kg or 22 lbs

Dimensions: 24″ X 16″ (60.69cm X 40.64cm

 

Specification

 

  • 24 Volt AC

  • Adjustable Pitch Control

  • 33.3 & 45 rpm

  • Dual-Motor

  • Belt Drive

  • Bamboo Platter with Copper Inlay and Bronze Ingot Insets

  • Levelling Legs

  • Dual-Plinth

  • Accommodates B-Series and P-Series 9″ & 12″ Tone Arms

  • Supports two arms at once

 

 

P-Series TA-1 TURNTABLE



 

MRSP  $ 1,425  / with 9" TA-1 Tonearm

MRSP  $ 1,785  / with 9" TA-2 Tonearm

MRSP  $ 1,095  / without Tonearm

MRSP $     105  / P-Series Record Clamp

The B-Series Bearing

 

To listen to this Youtube Video please turn off this websites background music track by clicking the play/pause button at the top of the page underneath our Logo

TA-2 Turntable Set-Up Video

The P-Series TA-1 Turntable is designed for audio enthusiasts at a competitive, cost-sensitive entry level. Our bamboo design is unique, and has been a featured product in audio shows over the past 5 years.
 

Weight: 4Kg or 9lbs

Dimensions: 21.5″ X 14″ (54.61cm X 35.56cm)

 

Specification

 

  • 24 Volt AC

  • Adjustable Pitch Control

  • 33.3 & 45 rpm

  • Belt Drive, Carbon Fibre Thread

  • Bamboo Platter, Plinth and Base

  • Nepheline Syenite Coated isolation feet / leveling legs

  • Accommodates Bam Bam and Pebbles 9″

 

The P-Series Bearing 

To listen to this Youtube Video please turn off this websites background music track by clicking the play/pause button at the top of the page underneath our Logo

Turntable Set-Up Video

 

45 minute description of how to set up the P-Series TT. Lots of insight into functionality !

P-Series TT

Playing Moving Hearts

- The Storm on Record

To listen to this Youtube Video please turn off this websites background music track by clicking the play/pause button at the top of the page underneath our Logo

P-Series TT in Action !

 

P-Series Turntable playing Moving Hearts - The Storm on Record

 

S-Series TA-0.5 TURNTABLE  --  NEW !!



 

MRSP  $    715  / with 9" TA-0.5 Tonearm

MRSP  $  1045  / with 9" Tonearm + MM Phono + Cartridge

Phono & Cartridge Details

  • 12 Volt DC – Powered

  • MM only

  • Calibrated for 5 mv, 47 ohm Cartridges

  • Audio Technica 95E Included

  • Phono By-Pass Switch Available for External Phono Use

Table Details

  • 24 Pole Synchronous AC Motor

  • Brass Pulley

  • 33.3 & 45 rpm

  • Belt Drive

  • Bamboo Platter

  • Levelling Legs

  • Bronze Collar Bearing with Steel Ball Bearing

  • Aluminum Sub Platter with Steel Shaft

TA-0.5 Arm Details

  • Comes with 9″ Arm

  • Three Ply Bamboo Laminate 12mm Thick

  • Soaked in Hemp Oil

  • Sealed in Beeswax

  • VTA & Azimuth Adjustments

  • Passive Anti-Skate

  • Bronze with Brass Collar Spike and Synthetic, High Viscosity Grease Bearing

  • Cardas Wire 33 AWG  Uninterrupted from Headshell Clips to Brass Female RCA

  • Silver Plated Cartridge Clips

  • Micro Bubble Level Included

Turntable Set-Up Video

10 minute description of how to set up the S-Series TT. Lots of insight into functionality !

TRI ART AUDIO TONEARMS

  • Available in 9″ and 12″ versions

  • Bamboo Arm

  • VTA & Azimuth Adjustment

  • Steal Pin & Grease Bearing Unipivot

  • Micro Bubble Level Included

  • Cardas Wire 33 AWG & Silver Plated Cartridge Clips

  • The P-Series TA-1 Tone Arm features the same, handmade bamboo design as our table. It is available together or separately and can also replace the arm of most other tables.

  • The 9″ version mounts on both P-Series and B-Series Turntables.

  • The 12″ version only mounts on the B-Series Turntable.

  • P-Series 9″ Effective Tone Arm Mass – 10g

  • P-Series 12″ Effective Tone Arm Mass – 14g

  • P-Series 9″ Arm to Spindle Distance – 222 mm [REGA-Standard]

  • P-Series 12″ Arm to Spindle Distance - 297 mm [SME-Standard]

B-Series TA-2 TONEARM



 

MRSP  $ 685  / 9"

 MRSP  $ 825 / 12"

 

  • Available in 9″ and 12″ Versions

  • Bamboo Arm

  • Anti-Skating Mechanism

  • VTA & Azimuth Adjustment

  • Brass Pin & Grease Bearing Unipivot

  • Micro Bubble Level Included

  • Cardas Wire 33 AWG & Silver Plated Cartridge Clips

  • The B-Series TA-2 Tone Arm features the same, handmade bamboo design as our table. It is available together or separately and can replace the arm of most other tables.

  • B-Series 9″ Effective Tone Arm Mass – 15g

  • B-Series 12″ Effective Tone Arm Mass – 19g

  • P-Series 9″ Arm to Spindle Distance – 222 mm [REGA-Standard]

  • P-Series 12″ Arm to Spindle Distance - 297 mm [SME-Standard]

Show More

Read Jack Robert's Review

 of the P-Series in Dagogo

B Series Record Clamp

Show More

To listen to this Youtube Video please turn off this websites background music track by clicking the play/pause button at the top of the page underneath our Logo

 

P-Series TA-1 TONEARM



 

MRSP  $ 385  / 9"

 MRSP  $ 495 / 12"

 

Show More
Show More
Show More

MUSIC

PLAYER

  • YouTube - Grey Circle
  • Pinterest - Grey Circle

Check out our Pinterest and YouTube Links

atelier 13 audio

AUTHORIZED BRANDS

LINK TO OUR BRANDS HERE

OTHER BRANDS

LINK TO OUR BRANDS PAGE