DEMO COMPONENT SALES

LOUDSPEAKERS - OPEN BAFFLE

​

TRI ART AUDIO Open Baffle 5 OPEN

​

Includes Level 2 Crossover

​

The creation of the The B Series 5.0 Open Speaker is the result of 40 years of experience in the Audio industry from its designer Steve Ginsberg. The definitive shape of the speaker and the solid bamboo laminate design reflect his commitment to making a reference loudspeaker, both stunning in its musicality and appearance. Two 15″ woofers provide impressive bass response without the boom of conventional box speakers. The midrange is sweet, voices come through with a natural real tone. Instruments are presented with space and air, with outstanding soundstage and imaging. The 5.0 has two external crossovers, each with two inputs, three outputs and adjustable volume control for the full range driver. The speakers come complete with spikes and bamboo feet, the crossovers come with a set of 0.5 meter jumper cables. These beautiful speakers and the crossover cabinets are soaked in an hemp oil bath for a natural beautiful finish. The 5.0’s will work with high current amplifiers tube or solid state.

Design: Open Baffle

Nominal Impedance: Single Input 8 Ω

Recommended Amplifiers: 60W Up to 150 W RMS

Sensitivity: 94 dB SPL (1W/1M)

Volume Matching: Crossover Only

Frequency Range: 27 – 40,000 Hz (+/- 3dB)

Driver Details

Total Drivers: Five

Input 1:

1″ Fabric Dome Tweeter (13,000 Hz and up) 20 Watts

8″ Full Range Paper Cone Cloth Edge

Super Tweeter (40,000 Hz)

Input 2:

Up to 150 Watts

Two 15″ Paper Cone Cloth Edge Woofers

Top 15″: 27-100Hz @ 1st Order 6dB Slope

Bottom 15″: 27-50Hz @ 1st Order 6 dB Slope

Crossover Details

Inputs: 2

Adjustable Volume Control for Full Range Speaker Section: Crossover Only

Outputs: 3

Cables: Set of 0.5-meter jumper cables with banana plugs.

Output 1 (Full Range)

100-Watt Attenuator

47-Ohm Resistor

100 Hz Single Cap Filter

Output 2 (Bass)

Single open-air inductor filter 100Hz @ 1st Order 6 dB Slope

Output 3 (Sub Bass)

Dimensions

H: 62.0″ (157.48cm) W: 19″ (48.26cm) D: 16.25″ (41.27cm)

​

​

Made in Canada

​

​

RSP  $ 6.050     

DEMO SALE  $ 2,999 ( firm )  + Shipping

​

Call us about shipping / pick up is an option

​

AMPLIFICATION - TUBE

​

AUDION Sterling KT88 Integrated Tube Amp

​

NEW IN BOX / with Warranty 

​

Audion Sterling KT88 Anniversary stereo is hard wired point to point using better graded components and larger, hand-built Audion wound output transformers (EI96). The volume control on the front and stereo inputs on the rear means that a pre-amplifier is not necessary with this unit. The amp is auto biased. It will take almost any KT88 (Unit is supplied with JJ tubes) and delivers a conservative 18 CLEAN Triode-Class A watts into 8 ohms.  Therefore, it has the power of competitors boasting 36-40W.

​

FANTASTIC with E.A.T. KT88 Reference tubes !

Power: 2 x 18 Watts Class A into 8 Ohms at 120V AC
Load: 4 – 8 Ohm Nominal
Distortion @ 1Watt: <0.1% No Feedback
Frequency Response: 40KHz ±1 db

Tubes: 2 x KT88 triode-strapped , 2 x 6922

Size: 16.5in deep, 9in wide and 7.4in tall - Less tubes
Weight: 31 lbs

​

​

MAP  $ 4000        SALE  $ 2499

AMPLIFICATION - SOLID STATE

​

QUAD ARTERA SOLUS - All in One 

​

DISPLAY - DEMO Component / with Warranty 

​

The Artera Solus - a multi-tasking hi-fi system packed into a single sleek and sophisticated box, combining a CD transport, DAC, pre-amplifier, and power amplifier in a single compact chassis, with extensive connectivity options including Bluetooth connectivity.

Key Technology & Features        DSD (up to DSD256) 

                                                       
Audio File Formats                       ALAC, WAV, FLAC, AIFF, WMA, MP3, AAC,

                                                        AAC­-HE, AAC+, DSD64, DSD128, DSD256
 

D/A Converter                               ESS ES9018 32bit DAC

USB Input                                      USB B (PC / MAC)
Digital Audio Inputs                     2 x Optical TOSI ink, 2 x RCA
Digital Audio Outputs                  1 x Optical TOSI ink, 1 x RCA (DIG)
Analogue Inputs                           2 x RCA (AUX1, AUX2)
Analogue Outputs                        2 x RCA, 2 x XLR, 6.3mm HP Jack
Speaker Outputs                          2 x Speaker Binding Post Terminals
Sample Rate (USB B)                    44.1 kHz, 48kHz, 88.2 kHz, 176.4kHz,                                                                192kHz, 384kHz
Sample Rate (Input / Output)        44.1 -192kHz
Standby Power Consumption     <0.5W
Pre-Amplifier Section    
Output Level (1 kHz)                     Variable Output    0 - 4 Vrms (Pre) 
                                                                                          0 - 8 Vrms (Bal) 
Frequency Response                    20Hz-20kHz, 1 kHz (± 0.2dB)
Total Harmonic Distortion           <0.002% (20Hz-20kHz)
Signal to Noise Ration(S/N)          > 103dB (1 kHz) 
                                                          > 110dB (A Weighted, 1 kHz)
Channel Separation                       > 100dB (1 kHz)
Power Amplifier Section    
Rated Power Output                     2 x 84W (8ohm) / 2 x 140W (4ohm)

Dynamic power                              <1% THD, 8/4/2/1ohm : 105W / 197W                                                               /303W / 170W
Frequency Response                    ± 0.5dB (20Hz-20kHz, 1 kHz)

                                                         ±    1dB (1Hz-60kHz, 1 kHz)
Total Harmonic Distortion           <0.009% (1 OW 20Hz-20kHz)
Signal to Noise Ration(S/N)          > 100dB (A Weighted,ref.75W)
Channel Separation                       >   82dB (A Weighted,ref.1 W)
Dynamic Range A-wtd                   98dB

​

​

RSP  $ 2,299         SALE  $ 1150  /  50% OFF

SOLD

PREAMPLIFICATION - TUBE

QUAD QC Twenty Four - Tube Line Preamplifier  

​

Open-Box

For the QC Twenty Four pre amp, our designer Tim de Paravicini scoured the globe for the very finest components, with possibly the best example of this being the new 'old stock' 6111WA double triode. 

With transformers designed by one of the world's leading authorities and relay input switching the musical signal is preserved in its purest form - pursuant to the philosophy of the theoretical perfect amplifier which Peter Walker himself stated is, 'a straight wire with gain'.

​

Tim de Paravicini , is widely acknowledged to be the UK's foremost valve amp designer. His design is faithful to Peter Walker's Philosophy of fundamental simplicity of design, ensuring the new preamps deliver the same wealth of detail and exquisite tone as their famous predecessors.

The QC Twenty Four has 2 main outputs, 2 Tape Play and Record connections and inputs for CD, Tuner, Aux 1, Aux 2 and an optional Phono port.

​

​

​

​

RSP $ 1,195

​

Special @ $ 650

​

AMPLIFICATION - SOLID STATE

For Exogal COMET DAC Owners !

​

EXOGAL ION   with HYPERDRIVE UPGRADE

Power Amplifier  

​

Dealer Display Unit  (Mint - with Warranty)

The Exogal ION is a high performance PowerDAC that is specifically designed to be an amplifier and processing extension to the Exogal Comet DAC. The Ion connects to the Comet via the EXONET Interface and provides 125 watts per channel (into 8 ohms). The Ion integrates fully with the Comet and there are no complicated remotes or apps required - the Comet handles it all for you! Simply connect the Comet and the Ion together with one cable and you're done!

​

​

Specifications

​

POWER OUTPUT 

125W 8 ohms per channel,  250W 4 ohms per channel
MINIMUM LOAD 

2 ohms per channel
PEAK OUTPUT CURRENT

10 amperes per channel
THD :   0.03%  @ 1W @ all frequencies into 4 ohms
OUTPUT NOISE :  170uVRMS A-weighted 10Hz-20KHz
DAMPING FACTOR :   > 30 into 1 ohms, >100 into 4 ohms
OUTPUT IMPEDANCE @ 100Hz :   < 0.03 ohms
DYNAMIC RANGE :   >105dB, A-weighted

​

​

​

​

Superb Review !   

By Doug Schroeder May 2019

RSP $ 4,250

​

Offer $ 1,650

​

PHONO STAGE

​

AQVOX  - Germany  PHONO 2 CI

Unique - The PHONO 2 CI is an excellent Phonopreamplifier in fully balanced Single-Ended Class-A design. It incorporates besides the regular RCA input which is based on voltage amplification, additionally an XLR TRUE BALANCED current amplifier input for MC-cartridges. Both inputs have flexible gain adjustment to match the cartridge with the input-amplifictaion.

​

The Phono 2 Cl is a state of the art audiophile fully balanced audiophile phono stage. Perhaps close to the best phono-pre amps in terms of flexibility, and surely one of the very best phono stages of all audiophile phono stages for the audiophile music lover, who wants enjoy full bandwidth and high dynamics.

​

GO TO PRODUCT PAGE FOR MORE DETAIL

​

RSP  $ 2,500        SALE  $ 995  /  60% OFF 

A-to-D CONVERTER - MIC Pre

AQVOX  - Germany  MIC2A/D

2 Channel audiophile Microphone Amplifier/ Instrument- / Line Amplifier
- 24 Bit/44.1 to 192 kHz – A/D-Converter
- Balanced XLR and RCA analog outputs
- Full balanced audio amplifier with Single-Ended Class-A output stage without global overall feedback loop
- Amplifier consequently avoids distortions instead of correcting afterwards by overall feedback
- Short signal path with only one amplifier per channel
- Most advanced Burr Brown A/D-Converter PCM1804
- For each channel 4 selectable input: Microphone, XLR, RCA, High-Z
- 3 analog outputs per channel: XLR, RCA, 6.3mm
- 3 digital outputs per channel: AES/EBU, COAX-S/P-DIF, Toslink
- Precision internal reference clock
- External synchronization by AES/EBU or Coax S/P-DIF-Sync. or optional Wordclock Sync.
- 48V-phantom voltage for condenser microphones
- 70 Hz filter
- Impedance options for microphone: 9 kOhm, 1.5 kOhm and 200 Ohm
- Send–Receive Loop
- Phase invert
- Limiter
- Gain range pre-selection in 10 dB steps from -30 up to + 40 dB
- LED volume meter
- Low noise, hum free power supply
- Finest audiophile parts used
- Professional 19" rack mounts available

​

RSP  $ 1,950       SALE  $ 795  /  60% OFF

​

​

​

PRO DAC 

​

AQVOX  - Germany  USB2D/A MK2 

Fact List

1. No Op Amp in signal path

2. True balanced circuitry for entire analog signal path.

3. Single ended Class A amplifiers. No global overall feedback-          loop, only very little local feedback.

4. Dual Mono DAC (2 x Burr Brown PCM1796) 
    results in endless (optimal) channel-separation, more dynamic      jet stability and less than negligible noise.
    USB-Codec: Texas-Instruments PCM2906 Transceiver. Digital          Input Chip p Transceiver AKM AK4114 192khz 24bit

5. Sample rate converted to 195 kHz independent of input                  sampling. Independent of input frequency, ultra stable 195            kHz clock produces extremely low jitter signal.

6. Precision internal clocks for jitter elimination. Temperature             and age-ing compensated oscillator-modules.
 

USB2.0 compatible Plug-n-Play, no drivers needed (VISTA, XP, WIN2000, WIN98, Linux and Mac OS X) but for better sound quality we recommend to use an ASIO driver

​

4x Digital Input:  AES/EBU, COAX, TOSLINK and USB

2x Analog Output:  balanced XLR and unbalanced RCA

1x Digital Output: COAX, TOS, AES/EBU-Input are routed to the USB-output (up to 48kHz/16bit)

1x Headphone Output in audiophile quality
 

External dimensions: (w / h / d): approx. 435 x 59 x 290 mm

Weight: approx. 3 kg

Operating AC Voltage: 100V to 240V - 50/60 Hz

​

GO TO PRODUCT PAGE FOR MORE DETAIL

​

RSP  $ 1,995        SALE  $ 795  /  60% OFF !!

​

​

​

Atelier 13 Audio property  -- Rarely Used

Atelier 13 Audio property  -- Rarely Used

Atelier 13 Audio property  -- Rarely Used

LOUDSPEAKER SYSTEM

​

​

ELAC    DEBUT REFERENCE DFR52  &  DBR52

Oak / White Finish

​

Building on the iconic status of ELAC’s Debut Series, a new Reference line emerges for our exclusive dealers. The Debut Reference brings significant acoustical and visual advancements. Designed to blend with traditional or contemporary styles. Debut Reference sounds as great as it looks!

​

Improved High Frequency Response

A newly developed waveguide combined with a more open grill design enhances upper high frequency response.

​

Enhanced Bracing

A new full perimeter brace that joins the top and the side panels significantly lessens cabinet vibrations, reducing cabinet coloration.

​

Cast Chassis Woofer

Our new cast chassis woofer provides improved stiffness for both strengthening the front baffle and minimizing chassis resonances

​

Dual Flared Slot Port

Our new dual flared slot vent allows for lower noise and higher bass output for improved bass dynamics.

​

​

​

DFR52 Bookshelf Specs

Drivers

1 x 1" / 25.4 mm Cloth Tweeter
1 x 6.5" / 165.1 mm Woven Aramid-Fiber/Kevlar Woofer

Enclosure Type

Bass-Reflex

Frequency Response

44 Hz to 35 kHz

Impedance

6 Ohms

Sensitivity

86 dB

Dimensions

8.2 x 10.8 x 14.1" / 20.8 x 27.4 x 35.8 cm (Each)

Weight

18.1 lb / 8.2 kg (Each)

​

DBR52 Bookshelf Specs

Drivers

1 x 1" / 25.4 mm Cloth Tweeter
1 x 6.5" / 165.1 mm Woven Aramid-Fiber/Kevlar Woofer

Enclosure Type

Bass-Reflex

Frequency Response

44 Hz to 35 kHz

Impedance

6 Ohms

Sensitivity

86 dB

Dimensions

8.2 x 10.8 x 14.1" / 20.8 x 27.4 x 35.8 cm (Each)

Weight

18.1 lb / 8.2 kg (Each)

​

New - Unopened Stock Rotation Sale

DFR52 Floorstander

RSP  $ 1,200        NEW IN BOX - SALE  $ 750  / pair

​

​

​

DBR52 Bookshelf

RSP  $    600        NEW IN BOX - SALE  $ 375  / pair

SOLD

LOUDSPEAKER SYSTEM

​

​

ELAC    UNI-FI SLIM 

White Satin Finish

The Slim series is designed by Andrew Jones, and employs the same concentric driver responsible for the award-winning sound of Uni-Fi. Ideal time-domain characteristics result from combining a tweeter and midrange diaphragm within a single voice coil—delivering the most coherent and accurate reproduction across the treble and midrange frequency spectrums.

The cabinet is very refined, featuring a smaller footprint and smooth, satin finish.

​

ELAC’s chief engineer Andrew Jones explains how Uni-Fi Slim speakers are built on the same foundation: “My goal with the original Uni-Fi series was to create a line of speakers with technology and performance normally reserved for speakers costing significantly more, by going with a 3-way design and employing a new in-house developed concentric driver. With Uni-Fi Slim, design-conscious listeners can enjoy the same outstanding sound along with more elegant proportions ad slim, high-quality cosmetics.”

​

A taller tower of power

​

The flagship floorstander of the Uni-Fi Slim series is a beautiful, precision instrument that offers advanced technology with its concentric midrange/high-frequency transducer and proprietary aluminum-cone drivers.

These support a 3-way, bass-reflex design that delivers a sound and appearance unequalled at their price point. Add a subwoofer to create a very serious two-channel system, or use it as the heart of a no-compromise surround set up.

​

Speaker type

• 3-way, bass reflex

Tweeter

• 1 x 1-inch soft dome, concentrically mounted

Midrange

• 1 x 4-inch aluminum cone

Woofer

• 3 x 5.25-inch aluminum cone

Crossover frequency

• 270Hz / 2,700 Hz

Frequency range

• 45 to 25,000 Hz

Sensitivity

• 85dB at 2.83 v/1m

Recommended amplifier power

• 40 to 140 wpc

Peak power handling

• 140 wpc

Nominal impedance

• 4 ohm, minimum 3.4ohm

Height

• 38.58 in

Width

• 7 in

Depth

• 11.54 in

Binding posts

• 5-way custom

Magnetic shielding

• No

Cabinet finishes

• Satin black or satin white paint finish

Accessories included

• Magnetic fabric grille

​

​

​

​

RSP  $ 1,720        DEMO SALE  $ 860  / pair

ANALOG GEAR / ENTRY LEVEL TURNTABLE

​

​

ELAC    MIRACORD 50   

​

A precision static-balanced, straight-tube tonearm with removable head-shell features a factory-mounted Audio Technica MM phono cartridge.

Designed with convenience in mind, the Miracord 50 is equipped with a built-in phono preamplifier, allowing you to add this turntable to any music system.

Drive System

Belt drive
Motor

DC motor
Selectable Speeds

331⁄3 and 45 rpm
Rotation Speed Variation

+/-1 %

Wow and Flutter

0.1 %
Signal-to-Noise Ratio

-67 dB or higher (A-weighted)

-60 dB or higher (unweighted)

Platter

Aluminum die cast

Connector

RCA jacks including RCA cable
Voltage

100 to 240 V AC / 50/60 Hz​
Power Consumption

1.5 W (less than 0.5 W at standby)

Dimensions (H x W x D)

5.5“ x 16.5“ x 14.2“

140mm x 420mm x 360mm

Weight

12.1 lb / 5.5 kg (approx.)

​

​

​

​

​

​

​

RSP  $ 350        OPEN BOX SALE  $ 210

BLOW OUT SALE 

ELAC Carina

Floorstander  - White

Mint Display Pair

Retail - $2,800

SOLD

OTHER

Shipping : Contact  Us

ELAC Uni-Fi Slim

Floorstander  - White

Mint Display Pair

Retail - $1,720

Offer - $860

OTHER

Shipping : Contact  Us

ELAC Debut 2.0 / 6.2

Bookshelf  - Black

Mint Display Pair

Retail - $350

SOLD

OTHER

Shipping : Contact  Us

ELAC DOW / 4.2

On Wall Monitor - Black

Mint Display Pair

Retail - $290

Offer - $149

OTHER

Shipping : Contact  Us

ELAC DS 10.2 - 10"

Subwoofer - Black

Mint Display Pair

Retail - $290

SOLD

OTHER

Shipping : Contact  Us

ISOTEK - EVO 3 Optiimum 

Power Cord - 2m

New-out-of-Box

Retail - $995

Offer - $499

OTHER :  1 available

Shipping : Contact  Us